|
|
|
|
| 1. |
Print out this page and make sure that the “Fit to Page”
or “Scale to Fit” options are not selected.
|
| 2. |
Cut out the Sizertool along the red line and create an
opening along the dashed line.
|
| 3. |
With numbers showing outside, insert the smaller end of
the Sizertool through the opening you have previously created and place
it around your ringfinger.
|
| 4. |
Pull the small end through the opening until it fits
comfortably.
|
| 5. |
To determine your approximate ring size, you may read
the corresponding circumference size in mm from the number scale as it
lines up with the edges of the opening. Don't tighten to much or your
ring will be to small, an easy fit will be sufficient.
|
| 6 |
The size will correspond to the circumference in mm. US sizes are under US.
Good luck
|
|
 |
Click here to print your ringsizer tools
|
Circumference mm |
US |
Diameter mm |
50,60 |
5,5 |
16,11 |
51,25 |
5,75 |
16,31 |
51,90 |
6 |
16,52 |
52,55 |
6,25 |
16,73 |
53,20 |
6,5 |
16,94 |
53,85 |
6,75 |
17,14 |
54,51 |
7 |
17,35 |
55,16 |
7,25 |
17,56 |
55,81 |
7,5 |
17,77 |
56,46 |
7,75 |
17,97 |
57,11 |
8 |
18,18 |
57,77 |
8,25 |
18,39 |
58,42 |
8,5 |
18,60 |
59,07 |
8,75 |
18,80 |
59,72 |
9 |
19,01 |
60,37 |
9,25 |
19,22 |
61,03 |
9,5 |
19,43 |
61,68 |
9,75 |
19,63 |
62,33 |
10 |
19,84 |
62,98 |
10,25 |
20,05 |
63,63 |
10,5 |
20,26 |
64,28 |
10,75 |
20,46 |
64,94 |
11 |
20,67 |
65,59 |
11,25 |
20,88 |
66,24 |
11,5 |
21,09 |
66,89 |
11,75 |
21,29 |
67,54 |
12 |
21,50 |
68,20 |
12,25 |
21,71 |
68,85 |
12,5 |
21,92 |
|
|
|
